Hi all

This is my first post here but have had my 11R for about five years. Any help on this problem would be greatly appreciated. I want to use the line input of the 11R for my synth to free up inputs on my interface (Apogee Quartet). The issue is I cannot get a stereo signal on the outputs. I have the main outputs connected to the interface and I have panned the outputs hard L/R. I eliminated this as a possible issue by hooking up my guitar and a ping pong stereo delay using the loop on the 11R and it worked beautifully. However I connected the stereo delay direct to the line inputs it came out in mono.

I have tried changing the output to amp settings but not sure what else is the problem any ideas?

Dale