Originally Posted By: Downrazor11
I found this answer on another forum, it seems you need to have something plugged into the input of the amp to get an output, even if you are only sending that signal in through the effects return:

Originally Posted By: ..
Eureka! I found the solution!

Plug the TS in the "Input" of the amp, not the "send" of the loop and it works!

Thanks guys for your help


Found it here: https://www.kemper-amps.com/forum/index....HT-40-no-sound/


Yup! that works! the problem is, with that solution I'm using the eq portion and controls of the amp, I want to just use the power stage and override all those settings and just interact between the the 11R and its settings and my cabinet using the amp as power amp