This is from my tutorial:
How to make multi Cab IR's from existing IR's for use with the Epsi:
with PT11:

1.Open a blank session and click on "setup" then "session" change the bit rate to 24 and make sure sample rate is at 44.1 khz
2.click "File" then "Import" then "Audio" navigate to the IR's in your comp and click"Add Files" then "Done" then "create new tracks from start position" then click "Track" then "New" select "Stereo" and "Master Fader" then click "Create"
3.you have an option to either change the output to "Main Out R" and "Main Out L" in "mix window" on each track or pan each track to your liking so some of each bleed over to the other.
4.Add any plugins to the master track you want as in screenshot.
5.Click "File" then "Bounce To" then "Disk" select as in screenshot
6.Put in Epsi "EPDA" folder. and your done.

I am pretty sure I used a couple different plugins when I was experimenting with this process and they all worked but they may not sound as good, it's been almost a year since I was doing the research for the tutorial so try some and report back. I know it was PT11 but it should be close to the same ...



Epsi Hookup and Settings Tutorial