The answer is "No" as already mentioned, but I found a way to use it w/ an amp & through the PA w/ the cab modeling on.

I'm using a EVH 5150 50-watt head as a power amp only w/ the standard 2x12 cab.

My Eleven rack is set to full Rig output or basically cab modeling on at all times.

You design all new 11R Rigs through your live amp speakers & test out what cab sims work through your current speakers/cab.

Once you get a good result you then mute your amp & listen through your monitors or PA. There's a back & forth dance where you make small tweaks until you are satisfied w/ both sounds.

I've done this w/ great results & now I have the best of both worlds. I get the power & feel of an actual guitar cab on stage & the full rig goes out directly to the PA.

Not all cab models will work with your actual guitar speaker & the speaker that you do have is a huge factor here as well.

Good luck & I hope that this helps you a bit.

X