Topic Options
Rate This Topic
#46552 - 05/28/18 04:03 PM Expression Pedal(s)
TheWesDavis Offline
new member

Registered: 04/05/18
Posts: 5
Hey guys, fairly new to 11R and brand new to the forum.
My current rig incorporates a Time Traveler for Tap Tempo presets...was wondering if there is a way to incorporate an extra external switch (via TRS Y cable) to engage/disengage an effect (delay) on each of my MIDI presets so I don't need to set "wet" and "dry" presets.

Top
#46555 - 05/30/18 12:36 PM Re: Expression Pedal(s) [Re: TheWesDavis]
DonaldR Offline
advanced member

Registered: 03/11/12
Posts: 223
Loc: Montreal, Quebec, Canada
Yes just add a second Time Traveler (or any momentary footswitch) and setup for delay on/off in External Pedals menu.

Top
#46557 - 05/31/18 05:56 PM Re: Expression Pedal(s) [Re: DonaldR]
TheWesDavis Offline
new member

Registered: 04/05/18
Posts: 5
So it would need to be a momentary and not a latching switch for turning a designated effect in the 11R on/off?
The Time Traveler is essentially a tap tempo switch...it's just programmable so you tap the preset switch once and your next BPM is ready to go.

Top
#46558 - 06/01/18 11:43 AM Re: Expression Pedal(s) [Re: TheWesDavis]
DonaldR Offline
advanced member

Registered: 03/11/12
Posts: 223
Loc: Montreal, Quebec, Canada
Ah, then yes a momentary switch.
If you know how to solder and want to save money just buy a momentary switch, a small aluminium enclosure and a 1/4" mono input jack on ebay/amazon. Solder cable between jack and footswitch. Done.

Top