Topic Options
Rate This Topic
#46347 - 06/03/17 04:42 AM Line L+R Stereo issue
dBlever Offline
new member

Registered: 09/05/13
Posts: 1
Loc: Australia
Hi all

This is my first post here but have had my 11R for about five years. Any help on this problem would be greatly appreciated. I want to use the line input of the 11R for my synth to free up inputs on my interface (Apogee Quartet). The issue is I cannot get a stereo signal on the outputs. I have the main outputs connected to the interface and I have panned the outputs hard L/R. I eliminated this as a possible issue by hooking up my guitar and a ping pong stereo delay using the loop on the 11R and it worked beautifully. However I connected the stereo delay direct to the line inputs it came out in mono.

I have tried changing the output to amp settings but not sure what else is the problem any ideas?

Dale

Top
#46366 - 07/03/17 10:56 AM Re: Line L+R Stereo issue [Re: dBlever]
Steve Thompson Offline
new member

Registered: 07/13/13
Posts: 1
Hi Dale,

Sounds like your setup is similar to mine, I was also trying to get stereo signals into and back out from the 11R, but it ended up mono

Best explanation I could find is that this is how it it designed:
http://duc.avid.com/showthread.php?t=334231

Now, why they name the inputs L and R makes little sense, maybe future updates may have made this possible.

Top