Page 3 of 4 < 1 2 3 4 >
Topic Options
Rate This Topic
#45966 - 02/06/17 07:58 PM Re: 11Rack no sounds.... [Re: arturocivit]
Brindle Offline
member

Registered: 09/10/14
Posts: 29
Turn on your Eleven R then push the SW ! button until that screen shows with all four values.

Top
#45967 - 02/06/17 07:59 PM Re: 11Rack no sounds.... [Re: arturocivit]
Brindle Offline
member

Registered: 09/10/14
Posts: 29
The amp output also is on the screen with your preamp controls also.

Top
#45968 - 02/07/17 07:43 AM Re: 11Rack no sounds.... [Re: Brindle]
Ichil Offline
advanced member

Registered: 01/21/15
Posts: 133
Loc: Italy
He already posted those values in this post http://www.elevenrackpresets.com/forum/ubbthreads.php?ubb=showflat&Number=45951#Post45951

Try this: connect the 11R in the return of the effects loop AND insert a cable or an adapter like this
https://images-na.ssl-images-amazon.com/images/I/41uY1MBNcAL._SY300_.jpg
in the input of the amp.
Let us know.


Edited by Ichil (02/07/17 07:43 AM)

Top
#45969 - 02/07/17 08:18 AM Re: 11Rack no sounds.... [Re: Brindle]
arturocivit Offline
advanced member

Registered: 02/20/14
Posts: 53
Loc: Caracas, Venezuela
Originally Posted By: Brindle
Turn on your Eleven R then push the SW ! button until that screen shows with all four values.


Hi there Brindle, thanks, sure, here's an image of that screen.



Thanks a lot!

Top
#45970 - 02/07/17 09:38 AM Re: 11Rack no sounds.... [Re: Ichil]
Downrazor11 Offline
advanced member

Registered: 07/09/14
Posts: 271
Loc: Iowa City
Originally Posted By: Ichil
He already posted those values in this post http://www.elevenrackpresets.com/forum/ubbthreads.php?ubb=showflat&Number=45951#Post45951

Try this: connect the 11R in the return of the effects loop AND insert a cable or an adapter like this
https://images-na.ssl-images-amazon.com/images/I/41uY1MBNcAL._SY300_.jpg
in the input of the amp.
Let us know.


Yes, try this!
1. Plug the 11r 'out to amp 1' into the 'return' of the HT100
2. put ANY 1/4" TS plug (not connected to anything else) in the input of the HT100

At this point you should be able to hear your 11r through only the power section of the HT100. Let us know if it works!!

Top
#45971 - 02/07/17 09:58 AM Re: 11Rack no sounds.... [Re: arturocivit]
Downrazor11 Offline
advanced member

Registered: 07/09/14
Posts: 271
Loc: Iowa City
Originally Posted By: arturocivit
Originally Posted By: Brindle
Turn on your Eleven R then push the SW ! button until that screen shows with all four values.


Hi there Brindle, thanks, sure, here's an image of that screen.

Thanks a lot!


No. That's not the right screen. It is starting to get frustrating trying to help, and I realize english may not be your first language, but you are not carefully reading the things people are writing, you aren't getting the intended meaning.

This is the screen Brindle is talking about:


You get to that page by backing out to the main display and just pressing the 'SW 1' button until it shows up.

Anyways, I think my post above will solve your problem (plug empty TS cable in to amp input while 11r is in fx loop return), please let me know if it does or doesn't. I am still willing to help.

Top
#45972 - 02/07/17 10:02 AM Re: 11Rack no sounds.... [Re: arturocivit]
Brindle Offline
member

Registered: 09/10/14
Posts: 29
My 11 r must be different.....I can turn on my unit and push the Sw 1 button until a screen shows with Four output values.... I am curious to the amp out, not amp 1 or amp2 as they are at 0.0 and should be passing a signal. Set those at 6 and set your amp out at 6. Amp output shows up at a few places.
OK....
arturocivit that is the wrong screnn shot above.
That is fromm the end of Rig View. You need the Outputs mode with four outputs. Just trying to throw something at ya to posibly get some sound out of this. Thanks Downrazor 11 for the screen shot.


Edited by Brindle (02/07/17 10:07 AM)

Top
#45973 - 02/07/17 10:03 AM Re: 11Rack no sounds.... [Re: Brindle]
Brindle Offline
member

Registered: 09/10/14
Posts: 29
Thanks Downrazor11!!!

Top
#45974 - 02/07/17 02:03 PM Re: 11Rack no sounds.... [Re: Brindle]
Rushian Offline
veteran member

Registered: 01/26/10
Posts: 569
Loc: New Jersey, USA
I'm beginning to wonder if this is an impedance matching issue,the amp out signal is a instrument level output. Did you try pressing the level button on the HT Stage 110? (next to the effects loop send)
_________________________
I'm a practicing guitarist, one day I hope to get it right..

Top
#45975 - 02/07/17 02:13 PM Re: 11Rack no sounds.... [Re: Rushian]
Rushian Offline
veteran member

Registered: 01/26/10
Posts: 569
Loc: New Jersey, USA
_________________________
I'm a practicing guitarist, one day I hope to get it right..

Top
Page 3 of 4 < 1 2 3 4 >