Page 1 of 2 1 2 >
Topic Options
Rate This Topic
#45606 - 08/26/16 03:05 AM Decay
sable904 Offline
advanced member

Registered: 07/30/11
Posts: 222
Loc: Upstate NY
I'm using Singtall's preset of Mr. Scary and changed the distortion to Black Ops. Now it seems to be when I strike single notes they have no sustain and fade out quick. I'm running also a sonic maximizer 882i with low contour at @ 11 am and process @ 2 pm. So I dont know if I should set the decay to where? Thanks, Eric

Top
#45607 - 08/26/16 08:01 AM Re: Decay [Re: sable904]
singtall Offline
veteran member

Registered: 09/06/10
Posts: 3540
Loc: Louisiana
turn the gate almost off and then adjust it until the gate just closes when you don't play a note.

Top
#45608 - 08/26/16 09:30 AM Re: Decay [Re: singtall]
sable904 Offline
advanced member

Registered: 07/30/11
Posts: 222
Loc: Upstate NY
Thanks , I will give that a try Singtall.

Top
#45609 - 08/26/16 09:41 AM Re: Decay [Re: sable904]
sable904 Offline
advanced member

Registered: 07/30/11
Posts: 222
Loc: Upstate NY
I assume you mean the gate is the cut on the distortion? Just wanna be sure I'm not overlooking anything. Thanks..

Top
#45617 - 08/27/16 08:03 PM Re: Decay [Re: sable904]
sable904 Offline
advanced member

Registered: 07/30/11
Posts: 222
Loc: Upstate NY
I guess I'm doing something wrong. I play a note and it cuts off to quick, no sustain?

Top
#45654 - 09/01/16 09:59 PM Re: Decay [Re: sable904]
sable904 Offline
advanced member

Registered: 07/30/11
Posts: 222
Loc: Upstate NY
Still having problems with decay, no sustain.??

Top
#45655 - 09/02/16 07:58 AM Re: Decay [Re: sable904]
singtall Offline
veteran member

Registered: 09/06/10
Posts: 3540
Loc: Louisiana
the gate is normally the culprit.

Top
#45659 - 09/02/16 02:55 PM Re: Decay [Re: singtall]
sable904 Offline
advanced member

Registered: 07/30/11
Posts: 222
Loc: Upstate NY
I do agree with you as you know your stuff. I don't know as 11r calls it cut? Is that the same? Or where else do I find the gat? Eleven rack editor ? Thanks

Top
#45660 - 09/02/16 03:07 PM Re: Decay [Re: sable904]
Downrazor11 Offline
advanced member

Registered: 07/09/14
Posts: 271
Loc: Iowa City
Originally Posted By: sable904
I do agree with you as you know your stuff. I don't know as 11r calls it cut? Is that the same? Or where else do I find the gat? Eleven rack editor ? Thanks



If you

1. press the 'EDIT/BACK' button on the 11r
2. then scroll over to the 'AMP' module
3. and press the 'SW1' button

you will be in the amp settings. Once there you will need to

4. scroll to the right once to get to the second page,
5. and 'GATE' should be the first parameter on the page

(at least these were the steps I took to get there using the 'Treadplate M' amp).

Top
#45661 - 09/02/16 06:48 PM Re: Decay [Re: Downrazor11]
sable904 Offline
advanced member

Registered: 07/30/11
Posts: 222
Loc: Upstate NY
Thank you very much.

Top
Page 1 of 2 1 2 >