Topic Options
Rate This Topic
#45425 - 05/25/16 09:29 AM Blending Pedals/FX Loop
TeeWX Offline
new member

Registered: 06/03/14
Posts: 3
Is there any way to get a blended tone for bass using the eleven rack and a basic distortion pedal?

Every time I search for this I just get a bunch of threads with people saying to run distortion effects in front of the 11R. I get that, but that isn't what I want to do. What I imagined was placing the pedal in the 11R FX Loop and trying to blend it with my clean tone by adjusting the mix level. With regular old pedals you'd do this with a blend pedal so the distortion doesn't take over your signal.

If possible, where would I place the FX Loop block in the chain?

Thanks!

Top
#45428 - 06/02/16 03:05 PM Re: Blending Pedals/FX Loop [Re: TeeWX]
Christophersad Offline
veteran member

Registered: 06/08/13
Posts: 690
Loc: Italy
i think you can do it that way,i would put the loop before the amp/cab section,but you can easily experiment different postition
_________________________
Sometime what you Want aint what you need.

Top