is there a way to run 2 identical effects in the chain?? - Eleven Rack User Group

You are not logged in. [Log In] ERUG Home » Forums » Discussion » Eleven Rack Discussion » is there a way to run 2 identical effects in the chain??

Topic Options

Rate This Topic

#43756 - 05/15/15 03:36 PM is there a way to run 2 identical effects in the chain??
Paul in Iowa advanced member Registered: 03/14/15 Posts: 71 Loc: Iowa	is there a way to run 2 identical effects in the chain?? they have a new phase 99 mxr with a dual 90 in it.. I did not know if it is possible to run 2 in the 11r chain to recreate this effect. also would be nice for distortion too... get that tight pinch going. _________________________ Thanks Paul in Iowa
Top

#43757 - 05/15/15 05:36 PM Re: is there a way to run 2 identical effects in the chain?? [Re: Paul in Iowa]
68injunhed advanced member Registered: 07/28/13 Posts: 119 Loc: SE Kansas	Short answer is, not really, unless it is an effect from fx1 and fx2. My solution to the lack of flexibility of signal routing was to put a Vox Delay Lab in the loop, and a Fulldrive 3 in front. Works great live. A little more tap dancing than I would like sometimes, but not too bad. I use the Behringer FCB1010 with the Eureka PROM in EP mode.
Top

#43769 - 05/20/15 01:17 PM Re: is there a way to run 2 identical effects in the chain?? [Re: 68injunhed]
Paul in Iowa advanced member Registered: 03/14/15 Posts: 71 Loc: Iowa	darn... would be cool if you could for sure!! or is there a way to sync the clock on a second 11r??? then you could link the two??? _________________________ Thanks Paul in Iowa
Top

View All Topics