Topic Options
Rate This Topic
#41095 - 09/17/14 11:49 AM Dual Delays
vickmarine Offline
new member

Registered: 09/14/14
Posts: 8
Loc: Montgomery
Some of the stuff I do, I like to layer delays, namely a dotted eighth and a quarter -sync'd on tempo - to create a nice galloping effect.

I know the 11R only has one delay in a rig, or signal chain. Is there a way to somehow get another delay in to one of the other fx blocks? Or, is hacking the 11R possible to be able to accomplish this?

I have no idea of the inner workings of the 11R...just stretching waaaay out there in hopes of a work-around.

Top
#41096 - 09/17/14 12:06 PM Re: Dual Delays [Re: vickmarine]
Christophersad Offline
veteran member

Registered: 06/08/13
Posts: 690
Loc: Italy
You can use an external delay in the fx loop,or if you're connected to PC you can use a plugin smile
_________________________
Sometime what you Want aint what you need.

Top
#41097 - 09/17/14 01:34 PM Re: Dual Delays [Re: vickmarine]
vickmarine Offline
new member

Registered: 09/14/14
Posts: 8
Loc: Montgomery
Addition to original post: I don't want to use an fx loop as that is more equipment I have to carry. I'm tired of lugging around an amp, pedal board, etc. The reason I'm trying to get two delays on the 11R is to minimize my load every week.


Edited by vickmarine (09/17/14 01:34 PM)

Top
#41098 - 09/17/14 03:33 PM Re: Dual Delays [Re: vickmarine]
Intelli-Shred Offline
veteran member

Registered: 08/06/11
Posts: 944
I like to run a 350ms and 500ms tape delay one into the other with some slight modulation on the repeats.
_________________________
Kevin Dillard
NGW/Alfred/Warner Bros. artist/author
DiMarzio Endorsing Artist
Morley Endorsing Artist
Nocturne Guitars UK Endorsing Artist

Top
#41100 - 09/17/14 03:49 PM Re: Dual Delays [Re: Intelli-Shred]
noguud Offline
advanced member

Registered: 04/22/13
Posts: 137
Loc: FL
Have you tried using the Dyn Delay with the ratio set to something other than 50%? You can have a galloping effect that way, from left to right, or right to left depending on which way you turn it.

Top
#41104 - 09/17/14 09:10 PM Re: Dual Delays [Re: noguud]
vickmarine Offline
new member

Registered: 09/14/14
Posts: 8
Loc: Montgomery
Yes, and have gotten close. However, it's just not the same effect I'm getting with layering two delays. I'm open to trying things though!

Top
#41105 - 09/17/14 09:11 PM Re: Dual Delays [Re: Intelli-Shred]
vickmarine Offline
new member

Registered: 09/14/14
Posts: 8
Loc: Montgomery
Thanks...I'm going to give that a go and see how it works. On my layered dual delays on my pedalboard, I can control the tempo on both with a tap.

Top
#41127 - 09/18/14 02:18 PM Re: Dual Delays [Re: vickmarine]
MildlyMoist Offline
member

Registered: 02/20/14
Posts: 20
Pretty sure the FX1/2 blocks can have anything in them. So stick a delay in the delay block, and another in FX1/2.

Top
#41128 - 09/18/14 03:58 PM Re: Dual Delays [Re: MildlyMoist]
Christophersad Offline
veteran member

Registered: 06/08/13
Posts: 690
Loc: Italy
you cant frown
_________________________
Sometime what you Want aint what you need.

Top
#41160 - 09/20/14 01:26 PM Re: Dual Delays [Re: Intelli-Shred]
vickmarine Offline
new member

Registered: 09/14/14
Posts: 8
Loc: Montgomery
Can you tell me how you set it up?
Thanks

Top