So, can any you of you electronics/programing geniuses use this to come up with a midi controller for the EPSI http://www.pjrc.com/teensy/index.html ? (i.e. MIDI to rotary encoder/push button input on the EPSi)

A midi controller using the teensy: https://github.com/Roming22/MidiController

I've had my Epsi for months now and today is the first time I've tried using it with the 11r...

Ok I am confused now... I've searched this thread and around some others and the settings for the FX loop should be
send 3
return 9
mix %100
or
send 9
return 3
(I saw Ross post the ladder 2x) but that way seems to be causing a little overdriving the Epsi it sounds better with the
send 3
return 9
but I seem to hear a slight high end fiz no matter what setting when I use the Epsi (not on 11r cab), and I am using my studio mons (BX8a's) I tried flipping the para eq on and off and messing with it to but can't find the feq.

also the settings on the Epsi it self, I saw someone post the hi set to 2.9 but that was worse for me.
It is on
Lo:0
Mid:5
Hi:0
LF:0.45
HF:2.56
is this the default settings? I saw someone post that if you left it off and unplugged for a long time it would go to default settings after a wile, is that right?

I screwed with it a little but to no avail.
what am I doing wrong?
we really need this info in one place... thanks in advance...

Push the button until it says 1.5d so it uses the impulses you put on the SDCard. Turn the knob to the # you want and hit the button again to load the new impulse. I don't think you want the mids boosted to 5...that seems odd. You can leave your send/return on the 11R at 0dB, Mix 100%.

seems like i remember the mids being at 5 is default, and that it is also setup to be like an old amplifier where mids set at 5 is kinda flat. i know mine is set factory default.

are you running your amp model or preset too loud causing distortion? maybe you just have a bad unit.

with any of my presets, you should be able to switch on the loop with the settings i gave and it should sound good with no distortion. if you try any of my presets and it doesn't sound right, you may have a defective Epsi.

I loaded about 30 of your presets and tryed them and messed with them some that were old and some of the ones that are new in the latest pack some were already on my unit for the past couple years the sound is good but just a very slight fiz is on a really high freq and I wasn't sure if it was the full range of the studio monitors that did it but when I'm not using the Epsi it does not do it. it does definitely sound better with the Epsi. I just was slightly annoyed by the almost not noticeable fiz

I have no idea how to post one of the patches I use with no problems (and no fizz), so if someone can let me know if I can post the tfx file in the body here let me know..

Also, what type of guitar sound are you trying to get? Sorry, I might have missed it but I only have a few minutes to try to help, and I love my Ownhammer-loaded EPSi!!

Make sure your cabinets on Eleven Rack are off and check your speaker breakup. You shouldn't be getting fizz if you're doing everything right and using decent IRs. Take your time with presets also, it's very easy to get sounds but you wont be able to just take a preset made for Eleven Rack cabs and get results. Start from scratch with a JRC and a Treadplate M and play around a bit with the desired EQ, FX, etc; that you normally would just as you would a completely new amp & FX unit.

The Singtall crunch singtall crunch II and singtall crunch III are just some of the ones that I was using. I am using the ownhammer modern pack...



the speaker breakup is only on the 11 rack cabinets, right? and I'm not having the problem when not using the Epsi.

I was making sure that I was turning off the cab by going into the cabinet settings in hitting the bypass then hitting the FX loop button on the front of the 11 rack switching back and forth listening to it. maybe I'm not describing what I'm hearing very well and should make a recording with a mic so that you guys can hear what I'm talking about just a very small sound when I use the Epsi almost like a blown tweeter sound but not really heavy very light and I know it's not blown because when I don't hear it when the Epsi is not there. I just can't describe it any better than that it's not like anything is wrong I'm just thinking maybe there's some other settings that I need to change. I also used presets from the modded heads section in the singtall super PAC which I think Ross said that he made to work with the Epsi not sure about that though. and I have been putting the FX loop after the cabinet.