Hi,

the Eleven Rack works flawlessly with the standard FCB 1010 firmware.
If you don't need the lights on the Stompboxes, even the "stomps" works.

Here's a link to my FCB1010 setup:
http://www.daten-hoster.de/file/details/297324/Eleven_Rack_UG_20.syx

1-2-3-4 -> A1-A4
6-7-8-9 -> B1-B4
next bank C1-C4 and D1 to D4 and so on

0 - tap tempo (in any bank)
5 - toggles Wah on/off (in any bank)

Left pedal - Wah (in any bank)
Right pedal - Volume (in any bank)

Any comments are welcome.
CU
Al

ps: posted again in a new thread to be found easier.....

Here's the HowTo load a sysex to the FC1010:

1.Get the FCB1010 Midi Editor:
http://www2.mtnsys.com:81/faq-fcb/PCEditorBeta.htm
2. Load the sysex:
http://www.daten-hoster.de/file/details/297324/Eleven_Rack_UG_20.syx
3. Put FCB1010 in sysex receive mode:
-switch on while pressing 'Down'
-press 'Up' three times
-press '7'
-click 'Transmit sysex'
-press 'Down' for three seconds and wait for Countdown
-that's it.....

How to toggle a Control (here: Dist):

It's pretty comfortable to toggle a Control with the active patch on the Eleven Rack. The Patch selector will work as toggle switch!

Let's say,we want to switch Distorsion on/off for soloing:

-Load FCB 1010 Midi Editor
-Choose the Bank/Patch where you want to have the toggle function.
-Activate Control change 1&2
-Enter 25 (for Dist) in both CC fields
-Enter 0 in Value row 1
-Enter 64 in Value row 2
-Deactivate Value(alt) in both rows (only UnO-Firmware)
-Transfer sysex to FCB1010
-That's it..........

When you select the patch your Distorsion can be toggled by pressing the patch again.

How to implement Tap Tempo:

It's pretty easy to have Tap Tempo on the Eleven Rack.
10 will work as TAP switch!

-Load FCB 1010 Midi Editor
-Choose the Bank/Patch 10 for Tap function.
-Deactivate ALL Program changes
-Activate Control change 1&2
-Enter 64 (for TAP) in both CC fields
-Enter 1 in Value row 1
-Enter 65 in Value row 2
-Deactivate Value(alt) in both rows (used UnO-Firmware)
-Transfer sysex to FCB1010
-That's it..........

When you select the patch your Distorsion can be toggled by pressing the patch again.

Btw: you can sitch the blinking tap tempo on and off in the settings of the Eleven Rack. Recommended is 'On' for control purposes

How to implement Wah & Volume Pedal Control:

It's pretty easy to have Pedals on the Eleven Rack.
Right Pedal will work as Volume!
Left Pedal will work as Wah!

-Load FCB 1010 Midi Editor
-Choose the Bank 0 /Patch 1.
-Expression Pedal set to on
-Set Controller to 4 (Upper), Minimum to 1, Maximum to 127
-Set Controller to 7 (Upper), Minimum to 0, Maximum to 127
-Transfer sysex to FCB1010
-That's it..........

Repeat for every Patch.

How to implement Tuner On/Off:

It's pretty easy to have a tuner toggle on the Eleven Rack.
5 will work as tuner switch!

-Load FCB 1010 Midi Editor
-Choose the Patch 5 for Tuner function.
-Deactivate ALL Program changes
-Activate Control change 1&2
-Enter 69 (for Tuner) in both CC fields
-Enter 127 in Value row 1
-Enter 0 in Value row 2
-Deactivate Value(alt) in both rows (used UnO-Firmware)
-Transfer sysex to FCB1010
-That's it..........

Tuner is toggled with Switch no. 5.
Repeat for every Bank you use.

Hi Al !
DO you have a idea for using your file with a mac on osx lion ?

Hi,

as I'm not using Macs, I can only speculate, but the tools below should help....

there's a tool called iFCB for Mac, the trial version is good for downloading, upload only via paid version.

Then theres FCBBooster.

And Ripwerx FCB1010 Editor, which is java based and should run on any machine.

hth
Al

Hi!

Any chance for reuploading sysex file?

Would be great if you could re-upload it - the original file can't be found.