Some help with a/b/y setup

I was wondering if you guys could make a suggestion toward what I am trying to do.

Basically I'm running the 11r as a cabinet emulator for the gsp2102. I'd like to do the same when the sgx2000 comes in but would like some sort of a/b switch to have either the 2101 or the sgx2000 active one at a time.

My sweetwater guy suggested the ART coolswitch, but was wondering if there are alternatives.

Thanks,

Narsh

Morley makes an A B switch

http://www.sweetwater.com/store/detail/A...CFSsV7AodH3wAsA

Ernie Ball makes a stereo volume/pan pedal that could fade from one side to another, but it is passive and there are some concerns about signal loss by way of splitting a guitar-level signal, I don't know if that applies in your case.

I have also used the Morley A/B/Y pedal, and it was good for what it was. I thought it added a slight bit of noise to the signal compared to the chain without it. It allows you the ability to switch back and forth between two sources but also to have them both on at the same time (the EB vol pedal can do that too but the volume is lower).