Topic Options
Rate This Topic
#44534 - 09/10/15 12:41 AM stereo setup questions
rjw Offline
member

Registered: 08/04/14
Posts: 19
Loc: Montreal / Florida
Hi

I would like to use my 11r to send sound to 2 amps with a slight delay to the 2nd amp, in an attempt to get a fatter and possibly different sound out of each amp.

I've done this with Cubase (alone, w/git plugged straight into a ur44)

I am looking for best results options

Thanks
_________________________
Luv my 11R

Top
#44540 - 09/10/15 12:28 PM Re: stereo setup questions [Re: rjw]
jaminjimlp Offline
veteran member

Registered: 02/18/13
Posts: 1052
Loc: Georgia
I would say try to put your stereo chorus at the end of the fx chain and then just plug the 1/4" "out to amp" connections to each amp... then you can mess with the rig output setting as well to see what sounds best.
_________________________
"May you be Blessed and our Lord Jesus keep you"

Top
#44543 - 09/10/15 11:42 PM Re: stereo setup questions [Re: jaminjimlp]
rjw Offline
member

Registered: 08/04/14
Posts: 19
Loc: Montreal / Florida
Thanks, I'll give that a shot
_________________________
Luv my 11R

Top
#44585 - 09/19/15 01:57 PM Re: stereo setup questions [Re: rjw]
rjw Offline
member

Registered: 08/04/14
Posts: 19
Loc: Montreal / Florida
the chorus is not quite what I want

any other options?

I just want stereo out with a single delay on one channel 10 to 30ms


Edited by rjw (09/19/15 01:58 PM)
_________________________
Luv my 11R

Top
#44586 - 09/20/15 09:31 AM Re: stereo setup questions [Re: rjw]
rjw Offline
member

Registered: 08/04/14
Posts: 19
Loc: Montreal / Florida
Having good success using the dyn delay...set repeat to 1 and short delay time and delay at end of chain

anyone try this ?

if so what other settings did you use.

I'll post a picture of my settings when I have it tweaked. at the moment it is sounding good, but I'm still tweaking

just saved myself the cost of a pedal!!
_________________________
Luv my 11R

Top