I am trying to "integrate" my existing pedal board into the effects loop on the 11R. I put the effects loop setting at 100, and hit the pedal to engage the effects loop option.

I wasn't hearing any of those effects in the sound. So, I turned off all other effects to see the The problem is that the effects loop. The problem seems to be that the sound coming from the effects loop is EXTREMELY low. When I isolate the loop, it can barely be heard.

Is there another setting that I need to set the parameters for?

Thanks
LPed

What are you using to modify the Effect loop parameters? The 11R itself or the client on the computer?


When I'm modifying the effects loop, I have the option to adjust the Send and the Return, as well as the Mix of the effects loop. And of course to run it off and on.

I used the PC application to set the params on the patch, then saved the patch to the 11R.

There is a switch on the back of the 11r for +4db rackmount fx's or pedal fx's. Check that out.

you have send level return level and then mix level knobs, have you set the mix to 100? if yes did you manage to try different send and return levels?

Thanks for all the feedback.

Yes, I tried 100%, and pretty much everything in between.

I hit the switch in the back. No real difference either way.

This has me stumped.