Maybe a little to advanced for me. - Eleven Rack User Group

You are not logged in. [Log In] ERUG Home » Forums » Discussion » Eleven Rack Discussion » Maybe a little to advanced for me.

Topic Options

Rate This Topic

#45626 - 08/29/16 03:30 AM Maybe a little to advanced for me.
sable904 advanced member Registered: 07/30/11 Posts: 222 Loc: Upstate NY	I have a ground pro mission board and of course the 11 rack. My question is that I want the one preset without delay and the same preset with delay. Can this work. I tried but when I went to the next same preset it still included the delay.
Top

#45627 - 08/29/16 06:39 AM Re: Maybe a little to advanced for me. [Re: sable904]
Ioannes advanced member Registered: 01/04/15 Posts: 57 Loc: Czech republic, Pzen	Make preset (f.e.) No A1 with delay and preset A2 as a copy of A1. Then go to A2, mute the delay (bypass) and save it. It has to work. _________________________ www.interitus.com
Top

#45628 - 08/29/16 07:54 AM Re: Maybe a little to advanced for me. [Re: Ioannes]
sable904 advanced member Registered: 07/30/11 Posts: 222 Loc: Upstate NY	Ok, I will give that a try, I know it should work. Thanks.
Top

#45634 - 08/29/16 01:39 PM Re: Maybe a little to advanced for me. [Re: sable904]
sable904 advanced member Registered: 07/30/11 Posts: 222 Loc: Upstate NY	How do I make a copy of a preset already designated as say A3? Sorry for being a newbi..
Top

#45636 - 08/29/16 10:42 PM Re: Maybe a little to advanced for me. [Re: sable904]
Ioannes advanced member Registered: 01/04/15 Posts: 57 Loc: Czech republic, Pzen	It is in the manual..;o) But if you have existing preset, just press "save" and roll right scroll button. Find the "new" preset and press save again. It will have the same name, but it will be on the new position as a copy. _________________________ www.interitus.com
Top

#45638 - 08/30/16 01:38 AM Re: Maybe a little to advanced for me. [Re: Ioannes]
sable904 advanced member Registered: 07/30/11 Posts: 222 Loc: Upstate NY	It worked, Thanks so much.
Top

#45639 - 08/30/16 01:55 AM Re: Maybe a little to advanced for me. [Re: sable904]
Ioannes advanced member Registered: 01/04/15 Posts: 57 Loc: Czech republic, Pzen	No problem, you are welcome. _________________________ www.interitus.com
Top

View All Topics