Topic Options
Rate This Topic
#45626 - 08/29/16 03:30 AM Maybe a little to advanced for me.
sable904 Offline
advanced member

Registered: 07/30/11
Posts: 222
Loc: Upstate NY
I have a ground pro mission board and of course the 11 rack. My question is that I want the one preset without delay and the same preset with delay. Can this work. I tried but when I went to the next same preset it still included the delay.

Top
#45627 - 08/29/16 06:39 AM Re: Maybe a little to advanced for me. [Re: sable904]
Ioannes Offline
advanced member

Registered: 01/04/15
Posts: 57
Loc: Czech republic, Pzen
Make preset (f.e.) No A1 with delay and preset A2 as a copy of A1. Then go to A2, mute the delay (bypass) and save it. It has to work.
_________________________
www.interitus.com

Top
#45628 - 08/29/16 07:54 AM Re: Maybe a little to advanced for me. [Re: Ioannes]
sable904 Offline
advanced member

Registered: 07/30/11
Posts: 222
Loc: Upstate NY
Ok, I will give that a try, I know it should work. Thanks.

Top
#45634 - 08/29/16 01:39 PM Re: Maybe a little to advanced for me. [Re: sable904]
sable904 Offline
advanced member

Registered: 07/30/11
Posts: 222
Loc: Upstate NY
How do I make a copy of a preset already designated as say A3? Sorry for being a newbi..

Top
#45636 - 08/29/16 10:42 PM Re: Maybe a little to advanced for me. [Re: sable904]
Ioannes Offline
advanced member

Registered: 01/04/15
Posts: 57
Loc: Czech republic, Pzen
It is in the manual..;o) But if you have existing preset, just press "save" and roll right scroll button. Find the "new" preset and press save again. It will have the same name, but it will be on the new position as a copy.
_________________________
www.interitus.com

Top
#45638 - 08/30/16 01:38 AM Re: Maybe a little to advanced for me. [Re: Ioannes]
sable904 Offline
advanced member

Registered: 07/30/11
Posts: 222
Loc: Upstate NY
It worked, Thanks so much.

Top
#45639 - 08/30/16 01:55 AM Re: Maybe a little to advanced for me. [Re: sable904]
Ioannes Offline
advanced member

Registered: 01/04/15
Posts: 57
Loc: Czech republic, Pzen
No problem, you are welcome.
_________________________
www.interitus.com

Top