#45186 - 01/20/16 10:09 AM
Re: Realtime playing Eleven Rack with IR in DAW
[Re: TLTD]
|
veteran member
Registered: 02/20/11
Posts: 2742
Loc: Michigan
|
Trying it with some IRs...for some reason it's weird unless the FX Loop is last, after I moved it, seems fine. Presets where I put the FX Block right after the amp for some reason just don't sound or feel right.
Definitely working in Sonar X3. Definitely some latency, but not too bad, might be a problem for multitracking, I dunno but GREAT FIND. Should've tried this out sooner.
Basically, you'll not hear anything with the FX Loop on until you click echo audio input on a track, so then you can turn the cabinets off and load an IR in your DAW.
Unlimited possibilities now. You can really appreciate the difference after going back to the Eleven Rack cabinets for a few days. Much better feel with the Ownhammer cabinets, by far.
With SIR2 (IR loader VST), I can stretch out the IR time, widen, etc. I had it stretched to 150%, wondered why it seemed like it was actually better this way. And if I record like that and chang my mind later, I can just put it back without reamping. YES!
Edited by TLTD (01/20/16 10:22 AM)
|
Top
|
|
|
|
#45187 - 01/20/16 10:41 AM
Re: Realtime playing Eleven Rack with IR in DAW
[Re: TLTD]
|
veteran member
Registered: 02/20/11
Posts: 2742
Loc: Michigan
|
|
Top
|
|
|
|
#45335 - 03/13/16 11:41 AM
Re: Realtime playing Eleven Rack with IR in DAW
[Re: Ichil]
|
member
Registered: 12/17/14
Posts: 35
|
NO WAY! Someone actually figured this out. Is it for real? I will try tonight. I have been longing for this ability with Reaper FOREVER! Thank You! I am praying, lol. I did a similar thing and it didn't quite work.
|
Top
|
|
|
|
#45352 - 03/24/16 05:40 AM
Re: Realtime playing Eleven Rack with IR in DAW
[Re: TLTD]
|
member
Registered: 12/17/14
Posts: 35
|
Say, I was thinking about this, I have not tried yet, no time, ughh. Anyway, couldn't we connect the main Xlr outs to the effects returns, via xlr to 1/4 inch cables, then the effects sends to the line in L/R,(set to rack)? That way we could do it in stereo, right? Or am I pushing it here? As long as all the levels are LOW to start, I don't think it would hurt anything right? Basically running the 11r preamp through it's own effects loop. I'm NOT SURE, so don't do it, if your not comfy, just another idea I will try FIRST. When I do I'll let you guys know, I need some xlr to 1/4 cables first. What do you think?
Edited by B32 (03/24/16 05:42 AM)
|
Top
|
|
|
|
#45353 - 03/24/16 05:55 AM
Re: Realtime playing Eleven Rack with IR in DAW
[Re: B32]
|
member
Registered: 12/17/14
Posts: 35
|
One more thing. You would want to, I think, put the loop at the end of the chain, like first mentioned, allowing you to retain your front of preamp effects. For ambient stuff, go get yourself the eventide anthology demo, (30 days no limitations, I think), open a track select line in STEREO, load the h3000, then your cab ir loader. Then Ultimate JOY. Fractal Who??? I hope it works, Like I said, I'm not sure, have not tried it YET, so proceed with caution, if you want to try my idea. My last one was an epic fail, lol. But.. Austin got me thinking some more, lol. That can be dangerous, lol.
|
Top
|
|
|
|
#45354 - 03/24/16 06:14 AM
Re: Realtime playing Eleven Rack with IR in DAW
[Re: Ichil]
|
member
Registered: 12/17/14
Posts: 35
|
You know what the lamest thing about this whole issue is that, all Avid would need to do is update the 11r driver to support, ASIO Direct Monitoring, but because they want to FORCE you to buy pro-drools, they wont do it. It 's already there, pro-tools shuts off the dry input automatically, I have complained many, many times and either people don't get it, or Avid just does not care. It would be really easy to update the firmware to accommodate a few user ir slots too and the Eleven rack would sell like hot cakes and still compete, but they are too stupid to acknowledge these facts. Rant over. Have Fun, the 11r still smokes anything other than the axe, IMO.
|
Top
|
|
|
|
|
|