Ok.. I swear I had this figured out before but I've moved and just set my studio back up and am running into routing confusion with the Eleven Rack. I've tried searching and I think I'm just not using the right terms.. but here is my problem.

I have my 11R set up as my audio interface for my DAW (Studio One 3 at the moment). I have XLR cables running from the 11R to my monitors and the 11R is set as my interface in the DAW. Now.. no matter what I do the processed sound from the 11R is coming through my monitors on top of what is playing in my DAW. Isn't there a way to have the 11R only play what is coming from the DAW? I swear there is but I can't remember/figure it out.

Right now I want to use the 11R as my input for the dry guitar signal and use some VST's in my DAW for the guitar tone.. feeling really dumb here. Help?

Really? No one?

Check this link: http://duc.avid.com/archive/index.php/t-308502.html it may help....

Close... but not quite... I didn't really explain it well I guess. So I have my monitors plugged into outputs of the 11R so I can just turn it on and play and hear the guitar through the monitors. Now the problem comes in when I want to use the 11R in my DAW. Once I open my DAW I can set the input in my DAW to the DI and that works fine, however the processed guitar sound comes through the speakers as well. I'll have to mess with it more when I have time... I'm sure there is something obvious I'm missing.

Thanks though!

hmmm.....simplest option may be to create a preset with all effects/amps/cabs turned off or bypassed...

Also look at page 64 of the manual - Configuring your inputs

also this: http://duc.avid.com/showthread.php?t=363856

Thanks for your help Rushian!

You have to select the track input "guitar input" like when you use the re-amp template, just load up a session and load re-amp template and look at the settings and you will see, dry track input should be guitar input and the regular guitar track input should be 11r if you want to hear the dry guitar track then mute the regular guitar track and set the out put of the dry track too 11rack output. oh and you may need to arm the dry track to record.

hope that helps.... just going from memory.

Aweseome! I'll try that out this weekend! Thanks for the input jaminjimlp.